MIVARE GROUP LABS APPS · PORTALS · WEBSITES · ONLINE STORES
Two people in work clothes push a cleaning trolley along a bright office corridor, seen from the side and behind
MIVARE LABS / SAAS APPS / MIVARE FACILITY

Every site cleaned. Every contract under control.

Mivare Facility is a ready-made app for cleaning companies and facility service providers. You plan the work, build the roster, check the quality and show clients what was done, all in one place instead of spreadsheets and message threads.

The owner of a cleaning company at a desk in the depot reviews the shift roster and a quality report, with cleaning trolleys in the background
WHO IT IS FOR

For companies that clean and look after other people's sites

You run a cleaning company or look after buildings for a living. You have several clients, several contracts and a dozen or so places where someone must turn up on time and leave everything in order. Every contract has its own rules: access hours, zones, frequency and expectations about quality.

Today all of this lives in spreadsheets, in the team leader's notebook and in the head of someone who has done the job for years. When the third client, the second team and the first complaint arrive, the searching begins: who was meant to be at the office block on Tuesday, was the task done, what did that contract really cost last month.

Mivare Facility puts that in order. Client, contract, site, zone, plan, task, check, defect: each has its place and is linked to the others. Your team sees what to do. You see what is done and what is late.

The hardest part is not cleaning a site. It is knowing that every site is clean and being able to show it.
WHO IT IS FOR
  • Companies cleaning offices and common areas
  • Companies looking after residential buildings
  • Hotel and apartment cleaning
  • Retail and service premises
  • Medical facility cleaning
  • Industrial site maintenance
  • Minor repairs on client sites
  • Property managers with a cleaning team
WHAT CHANGES

Everyday headaches the app takes off your plate.

01

The roster lives in a spreadsheet and in messages, and overlapping shifts only come to light on site.

The roster watches for overlapping shifts, leave and unavailability. Shifts that clash are rejected when you save them.

02

You cannot be sure a task was done until someone phones with a complaint.

A task can be finished only once every checklist item is ticked, and a quality check can follow.

03

Client requirements, keys, access hours and the emergency contact are scattered across files.

Everything is recorded on the site and the zone, so everyone on the team finds it in the same place.

04

Defects reported by phone get lost, and nobody knows who is dealing with them.

A defect has a priority, an assignee, a due date, a history of changes and counters for the urgent and overdue ones.

05

You do not know whether a given contract pays off, because you work out labour cost from memory.

The profitability report sets contract revenue against the cost of working time and defect costs, contract by contract.

A DAY WITH THE APP

A working day with Mivare Facility

These scenarios show how the app fits into an ordinary day of a cleaning company. They describe what you and your team do when the app is open.

  1. Team leader

    The dashboard shows what needs attention

    You open the dashboard and see today's tasks, overdue tasks, checks waiting for a decision, urgent defects and contracts ending within 60 days. Every number equals the list that opens when you click it.

  2. Team member

    Starting work on site

    A team member opens the app on a phone, sees their roster and taps Start work, choosing the site. They can read the post instructions for that place and confirm the current version.

  3. Team member

    A checklist, step by step

    In the task they tick off checklist items one by one, pick the materials used from the catalogue and add completion photos. The task can be finished only when every item is ticked, so nothing stays "almost done".

  4. Shift supervisor

    A reported defect

    A tap is leaking in the lobby. The supervisor reports a defect against the right zone, sets a priority and assigns it to the team or an outside contractor. Managers get a message.

  5. Quality inspector

    Check passed or task sent back

    The inspector passes a completed task, which closes it. If something is wrong, they add remarks and the task goes back for correction with a cleared checklist and a message to the assignee.

  6. Team member

    Shift handover

    At the end of the shift the team member finishes work with a short note and leaves a handover: what was done and what waits for the next crew.

  7. Owner

    Quality and profitability report

    You pick a period, group results by site, client or assignee, and see tasks done, checks passed and hours worked. With finance permission you also see the margin on every contract.

MODULES AND FEATURES

Everything a company looking after sites needs

Each screen handles one matter and has a list with filters, search and counters. Every save and status change goes into the company activity log.

01

Clients, contracts and sites

The company portfolio: who your clients are, on what terms you serve them and where your team works.

6 modules in this group
01

Clients

Name, full name for invoices, a tax number checked against the company country, contact person, address, notes and status. A client with sites or contracts is marked inactive, not deleted.

02

Contracts

Number, status (draft, in force, suspended, ended), validity period, frequency, scope, client requirements and the sites covered. The monthly value is visible only with finance permission.

03

Sites

Site type (office, residential building, retail, hotel, medical facility, industrial site, short-term rental and others), address, access hours, keys, emergency contact, entry instructions and a quality standard.

04

Zones

Rooms, floors, common areas, sanitary blocks, kitchens, outdoor areas and technical rooms, with area in square metres, equipment and remarks.

05

Import from a file

You load clients together with their sites from a CSV or XLSX file following the template. Before saving you see a preview with errors, clients and sites you already have are not duplicated, and every import can be undone as long as nothing from it is in use. You enter zones, contracts, employees, plans and checklists in the app.

06

Client portal

Links with an expiry date that you can revoke at any time. The client signs in with the link and a one-time e-mail code and sees their sites, schedule, check results and open defects. On a verified task the client confirms the work or enters a remark, and can also report a defect in the portal (as text, without a photo).

02

Cleaning

The heart of the app: from a checklist template, through a recurring plan, to a task that is done and checked.

8 modules in this group
07

Checklists

Your own templates, up to 80 items each. A task gets its own copy of the items, so changing the template does not change existing tasks.

08

Recurring plans

Site, zone, contract, checklist, assignee, days of the week and validity period. One button produces tasks for the next 14 days, with no duplicates.

09

Tasks

The status moves from Planned through In progress and Done to Verified or Needs correction. A verified task can no longer be changed.

10

Task execution view

Four tabs: checklist, materials, photos and quality check. A verified task can no longer be changed.

11

Materials and stock

A catalogue of materials with a unit, an initial stock and a minimum stock, kept by the manager, who records deliveries and corrects stock levels. On a task you pick a material and enter the quantity, and the stock drops by the quantity used; deleting the entry returns it to stock. Materials below the minimum are flagged. Only people with finance permission see the unit price.

12

Equipment and inspections

A register of machines, trolleys and tools assigned to a site: category, serial number, inspection interval in days and the date of the next inspection. You record an inspection or a breakdown on the equipment card, a breakdown creates a defect, and overdue inspections are flagged. The manager keeps the register.

13

Completion photos

Up to 20 photos per task in JPEG, PNG and WebP, closed once the task is verified.

14

Quality check

A passed check closes the task. A failed check requires remarks and sends the task back for correction.

03

Housekeeping

Preparing rooms, apartments and other units between guest stays: from the booking to approved readiness.

4 modules in this group
15

Stays and windows between them

A stay of a unit (a site or a zone) has arrival and departure dates. Stays in a unit do not overlap, and the window to the next arrival sets the preparation deadline. Filters show arrivals, departures and stays in progress.

16

Unit preparation

A stay creates a preparation with a cleaning task: a cleaner, a checklist, photos and a quality check. A window of up to 6 hours gives urgent priority, up to 24 hours high priority. The statuses are To prepare, In progress, To inspect and Ready, and readiness is approved by another person. Units not ready past the deadline go to the attention bar on the dashboard.

17

Restocking and damage

Linen, towels, supplies and equipment to restock are part of the preparation and must be restocked before readiness is approved. You report damage or a missing item as a defect of the unit.

18

Booking calendar

iCal import from a link, synchronised once a day or on demand, or from an .ics file. The import works one way and does not duplicate stays, and changes are not sent back to the booking channel.

04

Team

People, their time and what they know about the places they work in.

6 modules in this group
19

Roster

The system rejects shifts that overlap another shift of the same person or fall on a day of leave or unavailability. Team members confirm their own shifts. You pick a substitute from the people who are free and give a reason, and the record stays in the history. The employee gets an e-mail about a new or changed shift.

20

Daily routes

The order of a person's sites on a chosen day, with addresses and shift hours. The app estimates the travel time between sites (different within one city than between cities) and flags breaks that are too short and shifts that overlap. It is an estimate, without maps or route planning.

21

Availability

Unavailability, leave and availability, with a note that only the person and the manager can see.

22

Attendance and working time

Start work and End work buttons. One person has at most one open entry, and only a manager corrects entries, with the value before and after recorded.

23

Post instructions

Changing the text raises the version and every team member confirms it again. You see who has confirmed.

24

Announcements and shift handover

Managers write and pin announcements. Any team member can write a shift handover.

05

Defects and maintenance

Minor repairs and breakdowns on sites that do not get lost in phone calls.

4 modules in this group
25

Defect report

Site, zone, description, priority from low to urgent, due date and assignee: a team member or an outside company entered as text. A defect can also be raised by the client in the portal (as text, without a photo), by the equipment card after a breakdown and by a unit preparation for damage or a missing item.

26

Statuses

New, assigned, in progress, resolved and closed. Assigning requires an assignee, and a closed defect changes only by its status.

27

History and costs

Every change leaves a trace. The Costs tab is visible only with finance permission, and a defect with costs cannot be deleted.

28

Attachments

Photos and PDF documents on a defect, up to 30 per report.

06

Reports and costs

Answers to the questions an owner asks at the end of the month.

6 modules in this group
29

Quality report

Grouped by site, client or assignee: tasks, overdue, passed and failed checks, the share passed and the average rating.

30

Team report

Per person: roster hours, attendance hours, roster utilisation and completed tasks.

31

Costs and profitability

Contract revenue for the chosen period, labour cost at the person's hourly rate, defect and materials costs and the margin in money and as a percentage. The report clearly flags materials without a unit price.

32

Materials usage report

Materials usage in the chosen period, grouped by material, site or month. Only people with finance permission see the cost of the usage.

33

Hourly rates

A rate with an effective date and a history. Without a rate, hours do not enter the labour cost, which the report clearly marks.

34

CSV export

Every report downloads as CSV from the same data you see on screen.

07

Notifications and dashboard

Things that tell you by themselves that something needs doing.

4 modules in this group
35

Dashboard

Numbers for the day, the "Needs attention today" bar (including unit preparations that are overdue or waiting for inspection) and tables of tasks and defects, limited to the modules each person can access.

36

First steps

A new company gets a list of steps with progress, from company details to the Mivi assistant.

37

E-mail notifications

Task assignment, a failed check, a new or assigned defect, a new or changed shift, overdue tasks and a contract nearing its end. Nobody gets a message about their own action.

38

Seven languages

The app is available in seven languages, and each account picks its own.

INSTEAD OF A SPREADSHEET

Instead of spreadsheets, notebooks and phone calls

A spreadsheet and a phone are fine to start with. Trouble begins when the same information must live in several places.

01 / TEAM ROSTER

A roster that rejects overlapping shifts and takes leave into account.

TodayA spreadsheet someone has to keep an eye on, and messages about changes.

02 / CLEANING PLAN

Recurring plans that produce tasks two weeks ahead.

TodayA table in a file or the team leader's notebook.

03 / PROOF OF COMPLETION

A ticked checklist, photos and a quality check.

TodayA phone call saying "done".

04 / CLIENT REQUIREMENTS

Recorded on the contract, the site and the zone.

TodayScattered across e-mails and files.

05 / DEFECTS

A report with a priority, an assignee, a due date and a history.

TodayA chat message or a call to the manager.

06 / WORKING TIME

Starting and finishing work on a site, with corrections only by the manager.

TodayManual records or estimates.

07 / BOOKINGS AND TURNAROUND WINDOWS

An iCal calendar import, windows between stays and readiness approved after a check.

TodayA calendar copied by hand and calls asking whether a unit is ready.

08 / CLIENT CONTACT

A portal where the client checks the task schedule and check results, confirms the work and reports defects.

TodayE-mails asking for the status of the work.

09 / CONTRACT PROFITABILITY

A cost and profitability report for every contract.

TodayWorked out from memory or in a separate sheet.

GETTING STARTED

Start with one contract, not the whole company

One real contract with a few sites is enough to see how work looks in the app. The app is ready, and after launch you get 30 days of the full scope with no card required.

01

Create the company account

You enter the company details and an e-mail address, confirm it with a code and set a password. The 30-day trial starts.

02

Follow the first steps

The dashboard leads you in order: first client, site, zone and cleaning plan.

03

Load and enter your data

You load clients together with their sites from a CSV or XLSX file, with an error preview and the option to undo. You enter zones, employees, plans and checklists in forms.

04

Invite the team

You add people as users with a role and assign shifts in the roster. Invitations arrive by e-mail and can be withdrawn.

05

Generate tasks

One button generates tasks from the plans for the next 14 days, so you see who does what and where.

06

Use the help

The app has a help centre, and support replies on working days from 9:00 to 17:00, at the latest on the next working day.

SECURITY

Your company data, under control

Only what the app actually does. We do not promise certificates we do not hold.

01Separate data for each company Each company's data is isolated from other companies' data. Your clients, contracts and staff are visible only to your account.
02Permissions by module Each person has access only to the modules they have been granted. Contract values, defect costs and hourly rates need a separate finance permission, and without it those fields do not exist on screen.
03Two-step verification Once on, signing in needs a code from an authenticator app, and you get a set of backup codes shown only once.
04Activity log Every save, status change and deletion stays in the company log. A deletion also leaves a separate trace in the deletions log.
05A client portal you control A client link has an expiry date and can be revoked. The code goes to the address stored in the link, is valid for 10 minutes, and attempts are limited. The portal shows no amounts or team data, and the client can only respond to a verified task and report a defect.
06Files Photos and attachments are checked for file type and encrypted once stored.
07Your data can be exported Reports download as CSV, and the company owner can download a full archive of the company data.
PRICING AT A GLANCE

You pay for the team, not for the sites

The price depends on the number of active operational staff, not on sites or contracts, so another client does not raise your bill. Plan details are on the product page.

  • Only active operational staff are counted. Clients, guests, view-only people and outside contractors do not raise the fee.
  • All areas of the app are included from day one, with no paid module add-ons.
  • You can pay monthly or annually in advance, with a 15% discount for annual payment.
  • The trial lasts 30 days, covers the full scope and needs no card. A paid plan starts only after your decision.
  • A standard self-service start has no onboarding fee. For more than 100 active operational staff the price is set individually.
An assistant that suggests  where to start
MIVI, THE ASSISTANT

An assistant that suggests where to start

Mivi is an assistant in the app that the firm owner switches on in the settings. Once on, it shows a short summary of what needs attention and answers questions about data you can already see. The button in its answer opens the right task or defect.

Mivi is switched off by default. The company owner turns it on in the settings, and then each user decides for themselves whether to use it. While it is off, no data goes to the model provider.

01It points out overdue and unfinished tasks, tasks sent back for correction and failed quality checks.
02It sees only what the given person sees, according to their permissions.
03Before anything is sent, it masks e-mail addresses, phone numbers, account numbers and the names of clients and contact people.
04A user can delete their conversation at any time with one button.
05The Mivi+ add-on extends the assistant for the whole company. It is not required to work in the app.
FREQUENT QUESTIONS

Before you start, answers to what people ask most often.

For companies that clean and look after offices, buildings, hotels and apartments, or run site maintenance, with clients, contracts, sites and a team working to a roster.

Two people in work clothes push a cleaning trolley along a bright office corridor, seen from the side and behind
START WITH US

Less searching, more clean sites

Try Mivare Facility on a single contract and see a day in a company where the team knows what to do and you know what is done. Below you will find the other Mivare apps.